Clarion MAX685BT, Owner'S Manual & Installation Manual

Page: 55 / 83

Bluetooth Telephone Operations
53
MAX685BT
English
Owner
’s ma
nua
l
• Select either LOW or HIGH depending on the
type of your vehicle and cellular phone.
• The factory default setting is “ LOW ”.
●
Setting Ring Tone Select
The system can ring if the cellular phone cannot
generate ring tones when the Bluetooth
connection has been established.
• The factory default setting is “
AUTO ”.
●
Setting Ring Tone Volume
You can adjust the volume of the ring tone in 10
levels.
• The factory default setting is “
5 ”.
●
Setting Registration Type
You can change the distribution of maximum
number of Phone Book data can be registered to
each telephone.
• The factory default setting is “
3 ”.
●
Selecting Microphone
You can select the microphone to be used.
• The factory default setting is “
Internal ”.
Note:
• When the “ Internal ” is selected, and a call comes
in during the operation panel open, the operation
panel is automatically closed because the
microphone is on the operation panel.
• When the “ Internal ” is selected, the [
7
] (OPEN/
CLOSE) button is disabled during a call.
●
Setting Microphone Gain
You can adjust the input level of the microphone
in 5 levels.
• The factory default setting is “
3 ”.
Note:
• The input level of the microphone can be affected
by its surroundings. Adjust the level when the
person on the other end of the telephone has a
reception problem.
●
Confirming Bluetooth Information and
setting Pass Key
You can confirm the various information
concerning the Bluetooth Interface features.
Registering your cellular phone
(Pairing)
You can register up to 5 cellular phones.
1. Turn on the power of the cellular phone you
wish to register.
2. Touch the [ Cellular ] key to display the
Cellular Select screen.
2-1. Touch the [ LOW ] or [ HIGH ] key of the Noise
Canceller item to set the function.
[LOW]:
Suitable for a GSM cellular phone.
[HIGH]:
Suitable for a CDMA cellular phone.
2-1. Touch the [ AUTO ] or [ Internal ] key of the
Ring Tone Select item to set the function.
[AUTO]:
The system will ring only when the cellular
phone cannot generate ring tones.
[Internal]:
The system will ring regardless of the
cellular phone. Select this when no ring tone
is generated with the “
AUTO ” selected.
2-1. Touch the [
[
] or [
]
] key of the Ring Tone
Volume item to adjust the volume level.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [ 1 ], [ 2 ], or [ 3 ] key of the
Registration Type item to set the function.
[1]:
Allows 250 records for first two cellular
phones, and no record for the others.
[2]:
Allows 200 records for first cellular phone,
100 records for second and third cellular
phones, and 50 records for the others.
[3]:
Allows 100 records for each cellular phone.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [ External ] or [ Internal ] key of the
Microphone Select item to set the function.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [
[
] or [
]
] key of the Microphone
Gain item to adjust the input level.
2-1. Touch the [
C
] key to display the next screen.
2-2. Touch the [ Info ] key of the BT Info item to
display the information on the screen.
2-3. When you finish confirming the Bluetooth
information, touch the [ Back ] key to return to
the previous screen.
If you want to change the Pass Key setting
of this unit, perform the following steps.
2-4. Touch the text box of the Pass Key item to
display the Ten-Key Pad screen.
• The factory default setting is “
1234 ”.
2-5. Enter your desired 4-digit PIN number, then
touch the [ ENT ] key.