background image

8

M455

M455

4

M455

3

English

English

English

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.

Display Items

: MAGNA BASS EXTEND indication

: Stereo indication

: Disc indication

: Scan indication

: Repeat indication

: Random indication

: Category indication

: Mute indication

: Enter indication

: Manual indication

: Preset channel indication (1 to 6)
  Disc number indication (1 to 6)

: SIRIUS indication

Operation status indication
Titles, frequency, clock, etc. are 
displays.

Z-Enhancer Plus indication

2. PRECAUTIONS

1. When it is very cold in the boat and the unit is

used soon after switching on the heater, the
disc and the optical components may become
fogged and not operate properly. Wipe fogged
discs with a soft cloth. Fogged optical
components will naturally return to normal
when the unit is left for about one hour, after
which it will operate normally.

2. When the boat is underway in rough water the

CD may skip as a result of intense vibrations
and shock.

3. This unit uses a precision mechanism. Even

in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.

This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.

If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to consult the dealer or
an experienced radio/TV technician for help.

USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.

THE COMPACT DISC PLAYER and MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.

CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.

 INFORMATION FOR USERS:

.

CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY AND WILL VIOLATE FCC
APPROVAL.

Bottom View of Source Unit

CAUTION

Be sure to unfold and read the next page.

Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

Assicurarsi di aprire e leggere la pagina successiva.

Handling Compact Discs

Use only compact discs bearing the 

mark.

Do not play heart-shaped, octagonal, or other
specially shaped compact discs.

Some CDs recorded in CD-R/CD-RW mode
may not be usable.

Handling

• Compared to ordinary music CDs, CD-R and

CD-RW discs are easily affected by high
temperature and humidity. Prolonged exposure
to high heat and humidity may make the discs
unplayable. Therefore, do not leave them for a
long time in the
boat.

• New discs may

have rough
edges. If such
discs are used,
the player may
not work, or the
sound may skip.
Use a ball-point pen or the like to remove any
roughness from the edge of the disc.

• Never stick labels on the surface of the compact

disc or mark the surface with a pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.

• To remove a compact disc from its storage case,

press down on the center of the case and lift the
disc out, holding it carefully by the edges.

• Do not use commercially available CD

protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.

Storage

• Do not expose compact discs to direct sunlight

or any heat source.

• Do not expose compact discs to excess

humidity or dust.

• Do not expose compact discs to direct heat

from heaters.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center
of the compact disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner
to clean compact discs.

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

Ball-point pen

Roughness

Summary of Contents for M455




























Reviews: