Clarion DXZ785USB Owner'S Manual Download Page 35

Page: 35 / 47

English

DXZ785USB

iPod Operations

This section describes operations when
connected to an Apple iPod via the USB cable.

Notes:

• See the iPod Owner’s Manual for details

regarding operation conditions.

• The unit will not operate, or may operate

improperly with unsupported versions.

• For a list of compatible Apple iPod unit with the

this model, please contact your Clarion dealer or
www.clarion.com.

Connecting an iPod

When an iPod is connected to the USB cable,
“Shuffle” set on the iPod will become as follows:

• “Shuffle (Albums)” play

➜

Random play

• “Shuffle (Songs)” play

➜

All random play

The iPod has two modes, the “Play mode” and
the “iPod menu mode” for selecting tracks.
Switch between these modes by pressing the
[

MENU

] button.

Note:

• To connect iPod, please use the USB cable

attached in iPod.

Select iPod mode

1. Press the [

SRC

] button.

Playback will begin from the last file that was
played on the iPod.

Note:

• The following operations in Play mode operate

the same as in CD mode:

∗

Track selection:

[SEEK PANEL]

∗

Fast-forward/fast-backward:

[SEEK PANEL]

∗

Pause:

[

]

See “

CD/MP3/WMA/AAC Operations

” (page 25-

28) for details.

Other various play functions
(in Play mode)

Notes:

• These functions are not supported when in the

iPod menu mode.

• The Random function set on the iPod remains the

same after attachment/ detachment of the iPod.

• The Repeat function on the iPod will be changed

when you connect/disconnect the iPod to the
unit.

1. Press the [

OPTION

] button.

●

Repeat play

Play back one track repeatedly.

2. Push the [

SEEK PANEL

] leftward or

rightward to select “

RPT

”.

3. Press the [

] button to perform

repeat play.

●

Random play

Play all albums within a selected category, in
random order. (Corresponds to “Shuffle
(Albums)” command on iPod.)

2. Push the [

SEEK PANEL

] leftward or

rightward to select “

RDM

”.

3. Push the [

P.CH

] button upward or downward

to select “

Albums

”, and then press the

[

] button to perform random play.

●

All random play

Play all tracks within a selected category, in
random order. (Corresponds to “Shuffle
(Songs)” command on iPod.)

2. Push the [

SEEK PANEL

] leftward or

rightward to select “

RDM

”.

3. Push the [

P.CH

] button upward or downward

to select “

ALL

”, and then press the

[

] button to perform all random

play.

Summary of Contents for DXZ785USB















































Search results

Summary of Contents for DXZ785USB

Reviews:

Related manuals for DXZ785USB

Brands by name

Popular brands

Clarion DXZ785USB, Owner'S Manual

Search results

Summary of Contents for DXZ785USB

Reviews:

Related manuals for DXZ785USB

Brands by name

Popular brands