Clarion DXZ676USB, Owner'S Manual

Page: 23 / 38

Operations Common to Each Mode
English
21
DXZ676USB
3-4 Press the [ MENU ] button to select a
character type. Each time you press the
[
MENU ] button, the character type changes
in the following order:
Capital letters
➜
Small letters
➜
Numbers/
Symbols
➜
Umlaut
➜
Capital letters…
3-5. Push the [ P.CH ] button upward or
downward to select the desired character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and cancel the input message
mode.
∗
Press and hold the [ MENU ] button for 1
second or longer to cancel the input
message. Then press and hold the
[ ] button for 2 seconds or longer to
store the message and the message return
to the default setting.
●
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA/AAC
title.
∗
The factory default setting is “ ON ”.
2-1. Select “ AUTO SCROLL ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ON ” or “ OFF ”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
●
Setting the speed of the title scroll
This function allows you to adjust the speed of
the title scroll.
∗
The factory default setting is “ 3 ”.
2-1. Select “ SCROLL SPEED ”.
3-1. Push the [ P.CH ] button upward or
downward to select from “ 1 ” to “ 6 ”.
●
Setting the dimmer control
You can set the dimmer control “ HIGH ”, “ MID ”,
“ LOW ” or “ OFF ”.
∗
The factory default setting is “ MID ”.
2-1. Select “ DIMMER ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ HIGH ”, “ MID ”, “ LOW ”
or “ OFF ”.
●
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Select “ BLINK LED ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ON ” or “ OFF”.
●
Setting the external amplifier
∗
The factory default setting is “OFF”.
2-1. Select “AMP CANCEL”.
3-1. Push the [P.CH] button upward or
downward to select “ON” or “OFF”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
●
Setting the car speaker output for the
cellular phone
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately)
∗
The factory default setting is “L”.
∗
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select “TEL-SPEAKER”.
3-1. Push the [P.CH] button upward or
downward to select “R” or “L”.
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
DXZ676USB_EN.book 21 ページ ２００７年１月９日 火曜日 午後２時１１分