Clarion DMX5555z Owner'S Manual Download Page 9

Page: 9 / 13

280 7323 00

DMX5555z

280 7323 00

Other Handy Functions

7. Press Right button

or Left button

to se-

lect the desired character. Pressing Right but-
ton

moves the cursor to the next charac-

ter; pressing Left button

moves the cursor

to the previous character.

8. Repeat steps 5 to 7 to enter up to 10

characters for the title.

9. Press and hold ENT button

for 2 seconds

or longer to store the title into memory and
cancel title input mode.

Clearing titles

1. Play a CD or a CD in a CD changer, or tune a

radio station or TV station that you want to
clear the title for.

2. Press DISP button

and display the sub-

title.

3. Press TITLE button

. “TITL” appears in the

display and the display switches to the title
input display.

4. Press BAND button

5. Press and hold ENT button

for 2 seconds

or longer to clear the title and cancel the title
input mode.

Adjusting the way of title scrolling

There are 3 ways for scrolling a title in the dis-
play. You can select the way you prefer.

∗

The factory default setting is “AUTO”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “SCROLL”.

3. Press Up button

or Down button

change the display. Each time Up button

or Down button

is pressed, the display

changes among the 3 display methods avail-
able.

AUTO:

The title automatically scrolls over and over
again.

1-TIME:

A title scrolls once. To have title scroll again,
press TITLE button

MANUAL:

You must press TITLE button

to scroll the

display.

4. Press ADJ button

to return to the previous

mode.

Adjusting the display contrast

You can adjust the display contrast according to
the angle of installation of the unit.

∗

The factory default setting is “LEVEL 6”. (Adjust-
ment level: 1 to 11)

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “CONTRAST”.

3. Press Up button

or Down button

to ad-

just the contrast.

4. Press ADJ button

to return to the previous

mode.

Message display

When the unit is powered on or off, a message is
displayed. The user can turn this message display
on or off.

∗

The factory default setting is “ON”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “MESSAGE”.

3. Press Up button

to set the message dis-

play to “ON”; press Down button

to set the

message display to “OFF”.

5. Press ADJ button

to return to the previous

mode.

Triggered audio mute for cellular
telephones

This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.

∗

This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.

Other Handy Functions

CD changer mode

Number of titles

CDC655z connected

60 titles

CDC655Tz connected

100 titles

CDC1255z connected

50 titles

Mode

Number of titles

Radio mode

30 titles

CD mode

100 titles

TV mode

15 titles

Setting the clock

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “CLOCK”.

3. Press ENT button

4. Press Right button

or Left button

to se-

lect the hour or the minute.

5. Press Up button

or press Down button

to set the correct time.

∗

The clock is displayed in 12-hour format.

6. Press ENT button

to store the time into memory.

7. Press ADJ button

to return to the previous mode.

Note:
• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.

Switching the spectrum analyzer
display patterns

You can select one out of 4 patterns or set it to
off.

∗

The factory default setting is “PATTERN 1”.

Each time you press SPE-ANA button

, the

spectrum analyzer display pattern changes in the
following order:

PATTERN 1

➜

PATTERN 2

➜

PATTERN 3

➜

PATTERN 4

➜

OFF

➜

PATTERN 1...

Note:

The spectrum analyzer display is unavailable dur-
ing these operations below;
• Seek tuning and auto store in radio mode.
• Mute or pause.
• When “NO DISC” or an error message appears

in the display.

Setting the sensitivity of the spec-
trum analyzer

∗

The factory default setting is “MID”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “ANA SENS”.

3. Press Up button

or Down button

to set

the sensitivity of the spectrum analyzer.

You can choose one of “LOW”, “MID” or
“HIGH” for the sensitivity of the spectrum ana-
lyzer.

4. Press ADJ button

to return to the previous

mode.

Setting the speed of the spectrum
analyzer display

∗

The factory default setting is “HIGH”.

1. Press and hold ADJ button

for 1 second or

longer to switch to the adjustment selection
display.

2. Press Right button

or Left button

to se-

lect “ANA SPD”.

3. Press Up button

or Down button

to set

the speed of the spectrum analyzer display.

You can choose one of “LOW”, “MID” or
“HIGH” for the speed of the spectrum analyzer
display.

4. Press ADJ button

to return to the previous

mode.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for radio or TV stations
and CDs. The numbers of titles that can be
entered for each mode are as follows.

1. Press FUNC button

to select the mode you

want to enter a title. (radio, CD, CD changer or
TV)

∗

Titles cannot be entered for MDs with this unit.

2. Select and play a CD or a CD in the CD changer,

or tune to an appropriate TV or radio station.

3. Press DISP button

and display the title.

4. Press TITLE button

. “TITL” appears in the

display and the cursor position flashes.