Clarion DMSL-010FH6, Quick Start Manual

Page: 7 / 22

Connection
Troubleshooting
•
Connect transmitter to the DVI port on your computer.
•
Connect receiver to the DVI port on your digital display product.
•
Connect Single-mode LC type 1 channel standard fiber-optic cable
between transmitter and receiver.
•
Connect power adapter to the transmitter and receiver which has been
provided.
•
The blue LED will appear on the transmitter and receiver after all the
product connections are completed.
- Red LED On: Power supply.
- Blue LED On: Signal Transfer.
- Red Led On and Blue LED Blinking: Only power supply, signal not transfer.
(Connections are not completed or there is problem with compatibility)
If the malfunction is not fixed by the above measures, please contact the A/S center.
Screen is not
displayed.
- Check if the source device power is on.
- Check if connections to the source and display
device are correct.
- Turn the source device power off and on again.
- Check if connection to DC adapter is correct.
Noise is shown
on the screen.
- Check the DVI connection.
- Check the display resolution.