background image

12

DB225

English

Reset button

Problem

Cause

Solution

Power does not turn on. 
(No sound is produced.)

Fuse is blown.

Replace with a fuse of the same 
amperage. If the fuse blows again, 
consult your store of purchase.

Incorrect wiring.

Consult your store of purchase.

Compact disc cannot be 
loaded.

Another compact disc is 
already loaded.

Eject the compact disc before loading 
the new one.

Sound skips or is noisy.

Compact disc is dirty.

Clean the compact disc with a soft 
cloth.

Compact disc is heaviiy 
scratched or warped.

Replace with a compact disc with no 
scratches.

Sound is bad directly after 
power is turned on.

Water droplets may form 
on the internal lens when 
the car is parked in a 
humid place.

Let dry for about 1 hour with the 
power on.

Nothing happens when 
buttons are pressed. 
Display is not accurate.

Microprocessor has 
malfunctioned due to 
noise, etc.

Turn off the power, then press the 
DCP Release button 

1

 and remove 

the DCP.
Press the reset button for about 2 
seconds with a thin rod.

DCP or source unit 
connectors are dirty.

Wipe the dirt off with a soft cloth 
moistened with cleaning alcohol.

8. TROUBLESHOOTING

Summary of Contents for DB225













Reviews: