Clarion DB188RMP, Owner'S Manual

Page: 11 / 27

Basic Operations
English
11
DB188RMP/DB189RMP/DB189RGMP
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
●
Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
∗
The factory default setting is “ OFF ”.
2-1. Select “ Z-EHCR+ ”.
3-1. Each time you turn the [ ROTARY ] knob,
the tone effect changes in the following
order:
“ OFF ”
↔
“ B-BOOST ”
↔
“ IMPACT ”
↔
“ EXCITE ”
↔
“ CUSTOM ”
OFF : no sound effect
B-BOOST : bass emphasized
IMPACT : bass and treble emphasized
EXCITE : bass and treble emphasized
mid emphasized
CUSTOM : user custom
When “B-BOOST/IMPACT/EXCITE” is set:
3-2. Press the [ ] button.
3-3. Turn the [ ROTARY ] knob to adjust the
setting in the range of –3 to +3.
∗
The factory default setting is “ 0 ”.
3-4. Press the [ ] button to return to the
previous mode.
When “CUSTOM ” is set:
3-2. Press and hold the [ ] button for 1
second or longer. Bass/treble
characteristics become flat and “
FLAT ” is
show in the display.
3-3. Turn the [ ROTARY ] knob to change to the
“ OFF ” mode.
●
Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to “
CUSTOM ”.
2-1. Select “ BASS ”.
3-1. Press the [ ] button.
3-2. Press the [
x
] or [
v
] button to select as
following order.
“ B<G 0> ”
↔
“ B<F 60> ”
↔
“ Q 1 ”
3-3. Turn the [ ROTARY ] knob to adjust the
gain, the F (center frequency) and the Q.
B<G 0> :The factory default setting is “ 0 ”.
(Adjustment range: +7 to –7)
B<F 60> :The factory default setting is
“
60 ”.
(Adjustment range:
60/80/100/200)
Q 1 :The factory default setting is “ 1 ”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [ ] button to return to the
previous mode.
To change sound setting
1. Press the [ SOUND ] button to switch to the
sound adjustment selection display.
∗
The factory default sound setting is “ Z-
EHCR+ ”.
2. Then press the [
x
] or [
v
] button to
select the sound adjustment mode.
Each time you press the [
x
] or [
v
]
button, the sound adjustment mode
changes as following order:
“ Z-EHCR+ ”
↔
“ BASS ”
↔
“ TREBLE ”
↔
“ BALANCE ”
↔
“ FADER ”
∗
In the case of display blinking “ ENT ”, you
can press the
[ ] button to adjust the
setting value.
∗
The sound adjustment mode will be
displayed for 2 seconds before showing the
sound setting.
3. Turn the [ ROTARY ] knob to adjust the
selected audio mode.
4. After completing settings, press the
[ SOUND ] button to return to the previous
mode.