English
12
Bluetooth Operations
Press [SRC / ] button on the panel to select
“AUX”.
AUX is just for audio content with 3.5mm Jack
connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select “AUX
SENS”.
3. If the output level of connected external audio
player is “HIGH”, rotate [VOLUME] knob
and choose “LOW”. And if the output level is
“LOW”, choose “HIGH”.
AUX Operations
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the
car’s
speakers. Please
consult your nearest Clarion dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
on the song playback.
Audio streaming may or may not
resume after telephone interrupt as this
is dependent on mobile phone.
S y s t e m w i l l a l w a y s r e t u r n t o
Radio mode if audio streaming is
disconnected.
Note:
Be sure to read the chapter “Pairing before
proceeding.
Play / Pause a track
1. Push the [ 4 ] button to pause audio
playback.
2. To resume audio playback, push the [ 4 ]
knob again.
Selecting a track
Track-up
1. Press the [
] button to move to the
beginning of the next track.
2. Each time the [
] button is pressed,
playback proceeds to another track in
the advancing direction.
Track-down
1. Press the [
] button to move to the
beginning of the previous track.
2. Each time the [
] button is pressed,
playback proceeds to previous track in
the reverse direction.
Note:
Playing order will depend on Bluetooth
audio player. When [
] button is
pressed, some A2DP devices will restart
the current track depends on the duration
of playback.
During music streaming playback,
“A2DP ” will be shown on the display.
W h e n A 2 D P a n d H F P d e v i c e
i s d i s c o n n e c t e d , “ B L U E T O O T H
DISCONNECT” will be shown on the
display and return to the previously
selected audio source. Some Bluethooth
audio players may not have play / pause
syncronised with this unit. Please make
sure both device and main unit are in the
same play / pause status in BT MUSIC
mode.
ID3TAG display
During music streaming playback, for
music information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: ALBUM
->TITLE->ARTIST...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK but the user can adjust it to other
ID3 TAG information by pressing [DISP].
