background image

English

3

CZ302A

Front Panel / Generalities

Remove the DCP

Attach the DCP

2. PRECAUTIONS

For a longer service life, be sure to read the 

following cautions.

•   Do not allow any liquids on the unit from 

drinks, umbrellas, etc. Doing so may 

damage the internal circuitry.

•   Do not disassemble or modify the unit in 

any way. Doing so may result in damage.

•   Do not let cigarettes burn the display. 

Doing so may damage or deform the 

body.

•   If a problem should occur, have the unit 

inspected at your store of purchase.

•   The remote control unit may not work if 

the remote control sensor is exposed to 

direct sunlight.

For your safety, the driver should not operate the controls while driving. 

Also, while driving, keep the volume to a level at which external sounds can be heard.

1. When the interior of the car is extremely 

cold and the player is used soon after 

switching on the heater, moisture may 

form on the disc or the optical parts of the 

player and proper playback may not be 

possible. If moisture forms on the disc, 

wipe it off with a soft cloth. If moisture 

forms on the optical parts of the player, 

do not use the player for about one hour. 

The condensation will disappear naturally 

allowing normal operation.

2. Driving on extremely bumpy or rough 

roads can cause the disc to skip during 

playback.

3. This unit uses precision parts and 

components for its operation.  In the 

event that trouble arises, never open the 

case, disassemble the unit, or lubricate 

the rotating parts.  Contact your Clarion 

dealer or service center.

WARNING

The control panel can be detached to prevent 

theft. When detaching the control panel, keep it 

in the safety place and prevent scratches.

We recommend taking the DCP (DETACHABLE 

CONTROL PANEL) with you when leaving the 

car.

1.   Press the [

SRC  

 ] button (1 sec.) to turn 

off the power.

2.   Deeply push in [

OPEN

] button to unlock the 

DCP.

3.   Hold the side popped out, remove the DCP.

1.   Hold  the  DCP  and  ensure  that  the  panel 

faces towards you. Set the right side of the 

DCP into the DCP bracket. 

2.  Press the left side of the DCP until it locks.

CAUTION

•   The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or 

subject it to strong shocks.

•   Once the [

OPEN

] button is pressed and DCP is unlocked, car vibrations can cause the DCP 

to fall.

•   The connector for the main unit and DCP is extremely important. Be careful not to damage it 

by pressing on it with fingernails, screwdrivers, etc.

Note:

If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

4.   “Made for iPod,” and “Made for iPhone”

  mean that an electronic accessory has

  been designed to connect specifically to

  iPod, or iPhone, respectively, and has

  been certified by the developer to meet

  Apple performance standards.

  Apple is not responsible for the operation

  of this device or its compliance with

  safety and regulatory standards. Please

  note that the use of this accessory with

  iPod or iPhone may affect wireless

  performance.

  iPhone and iPod are trademarks of Apple

  Inc., registered in the U.S. and other

  countries.

5. The Bluetooth word mark and logos are 

owned by the Bluetooth SIG, Inc. and any 

use of such marks by Clarion Co.,Ltd. is 

under license.

  Other trademarks and trade names are 

those of their respective owners.

Cleaning the body

•   Use a soft, dry cloth and gently wipe off any dirt or dust. 

•   For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt 

gently, then wipe again with a dry cloth. 

•   Do not use benzene, thinner, car cleaner, etc., as these substances may damage the body 

or cause the paint to peel. Also, leaving rubber or plastic products in contact with the body for 

long periods of time may cause stains.

CZ302A

531-1629kHz

87.5-108MHz

CHINA

PN:127070009768

TX-1098K-A

051 722 877

This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.

QDID NO.: B017789

Summary of Contents for CZ302A
















Reviews: