English
10
CZ302A
Press [
SRC /
] button on the panel or
remote control to select “
AUX
”.
AUX is just for audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
AUX Operations
6. TROUBLE SHOOTING
GENERAL
Problem
Cause
Measure
Unit can not
power on.
Unit fuse blown.
Replace with new fuse of correct rating.
Car battery fuse blown.
Replace with new fuse of correct rating.
Unit can not
power on.
Nothing happens
when buttons are
pressed.
Display is not
accurate.
The microprocessor has
malfunctioned due to noise, etc.
Turn off the power and remove the DCP.
Press the [
RESET
] button with a thin rod.
Note:
When the [
RESET
] button is pressed, turn off
the ACC power.*
* When the [
RESET
] button is pressed, preset
radio stations, titles, etc. stored in memory are
cleared.
Remote control
does not work.
Battery depleted.
Change the battery.
Battery installed incorrectly.
Install the battery correctly.
No/low audio
output.
Improper audio output connection. Check wiring and correct.
Volume set too low.
Increase volume level.
Speakers damaged.
Replace speakers.
Heavily biased volume balance.
Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of car.
Insulate all speaker wiring connections.
Poor sound quality
or distortion.
Non-standard disc used.
Use a standard disc.
Speaker power rating does not
match unit.
Replace speakers.
Wrong connections.
Check wiring and correct.
Speaker is shorted.
Check wiring and correct.
Tel-Mute
malfunction.
MUTE wire is grounded.
Check the MUTE wiring and correct.
Unit resets itself
when engine
is off.
Incorrect connection between
ACC and Battery.
Check wiring and correct.
DISC Player
Problem
Cause
Measure
Disc cannot be
loaded.
Another disc is already loaded.
Eject the disc before loading the new
one.
There is an object install inside
the unit.
Remove the object inside the unit.
Sound skips or is
noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily scratched
or warped.
Replace with a compact disc with no
scratches.
Sound is bad
when power is first
turned on.
Condensation may form on the
internal lens when the car is
parked in a humid place.
Let dry for about 1 hour with power on.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their car stereo wirelessly and listen to the
tracks through the car’s speakers. Please
consult your nearest
Clarion
dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy on
the song playback.
Audio streaming may or may not resume
a f t e r t e l e p h o n e i n t e r r u p t a s t h i s i s
dependent on mobile phone.
System will always return to Radio mode
if audio streaming is disconnected.
Note:
Be sure to read the chapter “Pairing before
proceeding.
Play / Pause a track
1. Push the
[ 4 ]
button to pause audio
playback.
2. To resume audio playback, push the
[ 4 ]
knob again.
Selecting a track
Track-up
1. Press the [
] button to move to the
beginning of the next track.
2. Each time the [
] button is pressed,
playback proceeds to another track in the
advancing direction.
Track-down
1. Press the [
] button to move to the
beginning of the previous track.
2. Each time the [
] button is pressed,
playback proceeds to previous track in
the reverse direction.
Note:
Playing order will depend on Bluetooth
audio
player. When [
] button is pressed,
some A2DP devices will restart the current
track depends on the duration of playback.
D u r i n g m u s i c s t r e a m i n g p l a y b a c k ,
“A2DP
” will be shown on the display.
W h e n
A 2 D P a n d H F P
d e v i c e i s
disconnected,“
DISCONNECT
” will be shown
on the display and return to previously
selected audio source. Some Bluetooth
audio players may not have play / pause
synchronized with this unit. Please make
sure both device and main unit are in the
same play / pause status in
BT MUSIC
mode.
ID3TAG display
During music streaming playback, for music
information that is longer than the display
panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: ALBUM-
>TITLE->ARTIST ...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by press
[ DISP ]
button.
Bluetooth Operations
AUX Input sensitivity setting
1. Press and hold the [
DISP
] button (1 sec.).
2. Turn the [
VOLUME
] knob to select “
AUX
SENS
”.
3. If the output level of connected external
audio player is “
HIGH
”, rotate [
VOLUME]
knob and choose “
LOW
”. And if the
output level is “
LOW
”, choose “
HIGH
”.
