E
nglis
h
8
CZ109EL
Radio Operations
Listening to broadcasts
1. Press the [
SRC
] button and select radio
mode.
∗
PS: Programme service name
∗
PTY: Programme type
2. Press the [
BND
] button and select the
reception band. Each time the button is
pressed, the band changes as follows:
F1
(FM1)
➜
F2
(FM2)
➜
F3
(FM3)
➜
AM
(MW/LW)
➜
F1
(FM1)...
Tuning
3 tuning modes are available: seek tuning,
manual tuning and preset tuning.
S
eek tuning
2 seek tuning modes are available: DX SEEK
and LOCAL SEEK.
DX SEEK can automatically tune to receivable
broadcast stations; LOCAL SEEK can tune to
only broadcast stations with a good reception
sensitivity.
∗
If “
MANU
” is appeared in the display, press
[
BND
] (1 sec.).
“
MANU
” in the display goes off and seek tuning is
now available.
∗
If “
TA
” is appeared in the display, TP stations are
automatically sought.
●
DX SEEK
Press [
x
] or [
v
] to automatically seek
stations.
When the [
v
] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
x
] button is pressed, the station is sought
in the direction of lower frequencies.
●
LOCAL SEEK
If [
x
] or [
v
] is pressed and held in position
(1 sec.), local seek tuning will be enabled.
Broadcast stations with good reception
sensitivity are selected.
Manual tuning
2 modes are available: Quick tuning and step
tuning.
●
Quick tuning
Press and hold [
x
] or [
v
] (1 sec.) to tune a
station.
●
Step tuning
Press [
x
] or [
v
] to manually tune a station.
∗
If no operation is performed for 7 seconds or
more, manual tuning is cancelled and the display
returns to the previous mode.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) can be used to store broadcast
stations in memory. Press the corresponding
[
DIRECT
] button to automatically recall the
stored frequency.
Manual memory
1. Use seek tuning or manual tuning to select
the desired station.
2. Press and hold one of the [
DIRECT
] buttons
(2 sec.) to store the current station in preset
memory.
Auto store
The auto store function stores up to 6 stations
automatically tuned in sequential order. If 6
stations cannot be found, any previously stored
station remains in its memory position.
1. Press the [
BND
] button and select the
desired band (FM/AM (MW/LW)).
2. Press and hold the [
] button (2 sec.). The
stations with good reception are stored
automatically to the preset channels.
∗
If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan sequentially receives stations
stored in preset memory. This function is useful
when searching for a station stored in the
memory.
1. Press the [
] button.
2. When the desired station is received, press
the [
] button again to continue receiving
that station.
Note:
• Do not press and hold the [
] button (2 sec.),
or the auto store function will begin and the unit
will begin storing stations.
01_CZ109EL_ENG.book Page 8 Thursday, May 21, 2009 5:05 PM
