Clarion CX501A, Owner'S Manual

Page: 18 / 31

Bluetooth Operations
E
nglis
h
18
CX501A
●
AUTO ANS
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗
The factory default setting is “ OFF ”.
2-1. Select “ AUTO ANS ”.
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer the
call.
●
AUTO CONNECT
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗
The factory default setting is “ OFF ”.
2-1. Select “ AUTO CON ”.
3-1. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
●
PASS KEY
This PASS KEY is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗
The factory default PASS KEY is “ 1234 ”.
2-1. Select “ PASS KEY ”.
3-1. Press the [ ROTARY ] knob.
4-1. Press the [
x
] or [
v
] button to remove
the cursor.
5-1. Turn the [ ROTARY ] knob to select the
desired digits.
6-1. Press and hold the [ ROTARY ] knob
(1 sec.) to store in memory.
●
ADDRESS
This will hold the unique Bluetooth address. The
address is 16 figures.
2-1. Select “ ADDRESS ”.
The Bluetooth address 8 figures appears in
the display.
3-1. Turn the [ ROTARY ] knob to display.
●
Bluetooth Name
This will display the name of the Bluetooth.
2-1. Select “ BT NAME ”.
The Bluetooth name appears in the display.
●
Bluetooth Firmware version
This will display the Firmware version of the
Bluetooth.
2-1. Select “ BT FW ”.
The Bluetooth Firmware version appears in
the display.
CX501A_ENG.book Page 18 Tuesday, December 28, 2010 10:43 AM