Basic Operations
E
nglis
h
10
CX201A
3-1. Each time you turn the [
ROTARY
] knob to
select the setting, the setting changes in
the following order:
“
THROUGH
”
↔
“
60
”
↔
“
90
”
↔
“
120
”
∗
The factory default setting is
“
THROUGH
”.
●
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
This adjustment can be performed only when
the “
REAR/S-W
” is set to “
S-WOOFER
”.
2-1. Select “
S-W VOL
”.
3-1. Turn the [
ROTARY
] knob to increase or
decrease the subwoofer volume.
∗
The factory default setting is
“
0
”.
(Adjustment range: +6 to –6)
●
Setting the phase
This set can be performed only when the
“
REAR/S-W
” is set to “
S-WOOFER
”.
2-1. Select “
PHASE
”.
3-1. Turn the [
ROTARY
] knob to select as
following order:
“
NORMAL
”
↔
“
REVERSE
”
∗
The factory default setting is “
NORMAL
”.
●
Adjusting the high pass filter
2-1. Select “
HPF
”.
3-1. Each time you turn the [
ROTARY
] knob to
select the setting, the setting changes in
the following order:
“
THROUGH
”
↔
“60”
↔
“90”
↔
“120”
∗
The factory default setting is “
THROUGH
”
(through).
Note:
• During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
CX201A_ENG.book Page 10 Friday, January 14, 2011 2:13 PM