background image

Area Change Function

Use this to listen to the radio outside of the
United States.

Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10 kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency steps and fre-
quency range:

1) Turn the power on and set the tuner mode.

2) Keep the BND button 

pressed and while

pressing the button, press the RPT button 

.

3) Release the buttons.

This procedure changes the factory setting to
9 kHz steps for AM and 50 kHz steps for FM,
the standard calibrations for countries other
than the U.S.

To change the AM/FM setting back to the U.S.
standard frequencies:

1) Set the tuner mode.

2) While pressing the BND button 

, press the

RDM button 

.

3) Release the buttons.

Your car stereo will once again be calibrated
to receive standard U.S. transmissions.

The chart below lists the frequency specifica-
tions for the U.S. and other countries.

Mute

Use this function to turn off the sound immedi-
ately.
Press the MUTE button 

. The sound turns off

and “MUTE” appears on the display. Press the
MUTE button again to cancel the mute mode.

CD Changer Operation

When a separately sold CD changer (CDC635/
CDC1235) is connected, it can be controlled
from the ARX4570.
CD-ROMs cannot be played.

Listening to the Disc

Press the FNC button 

and select the CD

changer mode, then the CD starts playing.

Stopping (pausing) Playback

Press the Play/Pause button 

Press the Play/Pause button 

again to resume

playback.

Selection of CDs

Press the DISC Up button 

or the DISC Down

button 

, then select the CD you wish to play.

UP: Every time you press the button, the

CDs will be selected as:

1....

DN: Every time you press the button, the

CDs will be selected as:

1.....

Selecting Tracks (songs)

Press the Left and Right buttons 

.

: Playback will start from the next track.
: Playback will start from the beginning of

the track currently playing. When this
button is pressed again, the CD will play
from the previous track.

Fast-Forward and Fast-Backward 

Press and hold the Left and Right buttons 

.

: To fast-forward
: To fast-backward

*

Pressing the Left / Right button for 1 second or longer
will move forward or backward 5 times faster than nor-
mal play, and pressing it for 3 seconds or longer will
do the operation 30 times faster.

20

20

8

7

17

17

5

17

AM

FM

Frequency
spacing

Frequency
range

Frequency
spacing

Frequency
range

Inital Setting

(U.S. standard)

New Setting

(outside U.S.)

10 kHz

530 to
1710 kHz

200 kHz

87.9 to
107.9 MHz

9 kHz

531 to
1629 kHz

50 kHz

87.5 to
108 MHz

14

18

15

18

11

English

Summary of Contents for ARX4570















Reviews: