Clarion ARX4570, Owner'S Manual

Page: 7 / 14

Tape Operation
Loading Tapes
Insert the cassette tape into the Cassette inser-
tion slot with the side on which the tape is
exposed facing the right. Playback starts auto-
matically.
* The metal tape setting is set automatically when a
metal or chrome tape is loaded.
*
When the end of the cassette tape is reached, the
auto reverse mechanism is activated and the other
side of the tape begins playing automatically.
Listening to a tape which is already loaded
Press the FNC button
to select the tape
mode. Playback begins automatically.
*
It is possible to listen to the radio during fast-forward,
rewind or search operations.
Once the operation is complete, tape playback
resumes (Monitor).
Stopping Playback Temporarily
Press the Play/Pause button . Press the but-
ton again to resume playback.
Ejecting Cassette Tapes
Press the Eject button . The cassette tape is
ejected.
* The radio mode is set automatically 4 seconds after
the eject button is pressed.
Fast-Forwarding and Rewinding
Use the Left and Right buttons .
: Press this to fast-forward the tape.
: Press this to rewind the tape.
APC (Auto Program Control)
Press the Left or Right button twice.
: Press this twice to move ahead to the
beginning of the next selection.
: Press this twice to move back to the
beginning of the current selection.
Switching to the Other Side of the
Tape
Press the PROG button . Playback is
switched to the other side of the cassette tape.
FF Scan Function (Intro Music Scan)
When the SCN button is pressed, “SCN”
appears on the display, and the first 10 seconds
of all the tracks on the cassette tape are played.
Press the SCN button again to stop scanning.
Repeat Function (Repeat Play)
When the RPT button is pressed, “RPT”
appears on the display and the current track is
played repeatedly. Press the RPT button again
to cancel the repeat mode.
Blank Skip Function
Use this function to automatically skip to the
beginning of the next recorded section when
there is a blank section of 12 seconds or more
on the tape.
When the BLS button
is pressed, the blank
skip mode is set and “BLS” appears on the dis-
play. Press the BLS button
again to cancel
the blank skip mode.
Notes:
The APC, scan, repeat and blank skip functions will not
work with the following types of tapes:
• Tapes on which the recording level is low
• Tapes on which there is less than 4 seconds of blank
space between selections
•
Tapes on which there are long pauses in the middle
of selections
•
Tapes on which there is much noise between selec-
tions
12
12
15
16
18
20
20
6
17
5
9
English