Clarion Addzest DXZ825, Service Manual

Page: 5 / 27

-5-
ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display Cause Measure
A CD is loaded upside-down inside the CD deck
and does not play.
Eject the disc then reload it properly. ERROR 6
ERROR 2 A CD inside the CD changer is not loaded. This is a failure of CD changer’s mechanism.
ERROR 3 A CD inside the CD changer cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6 A CD inside the CD changer cannot be played
because it is loaded upside-down.
Eject the disc then reload it properly.
ERROR 2 An MD inside the MD changer is not loaded. This is a failure of MD changer’s mechanism.
ERROR 3 An MD inside the MD changer cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6 An MD inside the MD changer cannot be played
because it is loaded upside-down.
Eject the disc then reload it properly.
If an error display other than the ones described above appears, press the reset button.
ERROR H Displayed when the temperature in the MD
changer is too high and playback has been
stopped automatically.
Lower the surrounding temperature and wait for
a while to cool off MD changer.
A CD is caught inside the CD deck and is not
ejected.
This is a failure of CD deck's mechanism. ERROR 2
ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
DXZ825
Displayed when a non-recorded MD is loaded in
the MD changer.
Load a pre-recorded MD in the MD changer.
CD
CD
CH
MD
CH