Cleaning the Tester
39
Cleaning the Tester
The Tester case can be cleaned with a damp cloth, with if
necessary, a small amount of mild detergent. Prevent excessive
moisture around the socket panel or in the lead storage area.
Do not allow liquid inside the Tester, or near the sockets panel. Do
not use abrasives, solvents, or alcohol.
If any liquid is spilt into the Tester case, the Tester should be
returned for repair, stating the cause of the defect.
User Maintenance
The Tester is a rugged quality instrument. However, care should
always be taken when using, transporting and storing this type of
equipment. Failure to treat the product with care will reduce both
the life of the instrument and its reliability.
If the Tester is subject to condensation, allow the Tester to
completely dry before use.
•
Always check the Tester and all test leads for signs of
damage and wear before use.
•
Do not open the Tester under any circumstances.
•
Keep the instrument clean and dry.
•
Avoid testing in conditions of high electrostatic or
electromagnetic fields.
•
Maintenance should only be performed by authorised
personnel.
•
There are no user replaceable parts in the Tester.
•
The unit should be regularly calibrated (at least annually).
•
For repair or calibration return the instrument to Seaward
Electronic Ltd at the address overleaf
