Doc ID - 1234
• Rev 10
16 / 24
4. Tap
Start Removal Mode,
and then remove the device as per the
manufacturer’s instructions.
Note:
Press and hold the same button used in pairing the device to remove
the device.
Pairing and removing the door lock with Fusion
Before installing the door lock, pair it.
Note:
The BE469NX/BE468NX may have pairing connectivity errors and require
more than one pairing attempt. In some cases, the BE469NX/BE468NX door lock
requires a factory reset.
To complete a factory reset on the BE469NX/BE468NX, hold down the Schlage
button on the lock while connecting the batteries. This resets the door lock and
restores the lock’s ability to pair.
To pair the door lock with Fusion:
1. Access your project, and then click the
Z-Wave Wizard
icon
.