Clare Controls HDBaseT CM-BT20-COMPACT-70-RX, Manual

Page: 13 / 24

HDBaseT Compact Extender Set 70m with ARC User Guide 5
Connection procedure
To connect the HDBaseT Compact Extender Set 70m:
1. Connect HDMI from the source (such as Blu-ray) to the HDMI IN port of the
transmitter using an HDMI cable.
2. Connect the HDBT OUT port of the HDBaseT CM-BT20-COMPACT-70-TX to the
HDBT IN port of the receiver with a single CAT5e/CAT6 cable using TIA/EIA
T568B terminations at each end.
3. Connect the HDMI OUT port of the HDBaseT CM-BT20-COMPACT-70-RX to an
HDMI in port on the display using an HDMI cable.
4. When using the bi-directional IR control, do the following.
a. Connect the IR emitter at either end to the IR TX port on the HDBaseT
CM-BT20-COMPACT-70-TX or RX.
b. When using a powered IR receiver, connect via a 3.5mm stereo plug to the
IR RX on either the HDBaseT CM-BT20-COMPACT-70-TX or RX.
5. Connect the 12 VDC power adapter to the power port on the
HDBaseT CM-BT20-COMPACT-70-TX transmitter. The HDBaseT
CM-BT20-COMPACT-70-RX receiver is powered through PoH.
PoH
The CM-BT20-COMPACT-70 supports PoH. Connect the DC adapter to either
CM-BT20-COMPACT-70-TX or RX for power.
Figure 5: PoH connection