Doc ID
– 1042 • Rev 08
11 / 12
Installing the GD00Z-5 transceiver and tilt sensor
To install the GD00Z-5 transceiver and tilt sensor:
1. Install the GD00Z-5 transceiver and tilt sensor according to the
manufacturer’s instructions.
2.
Next, follow the manufacturer’s system operations to synchronize the system.
3. Access your ClareHome app and verify that the Linear garage door opener is
now available in the
Device
tab.
Using the garage door opener in the ClareHome app
Once added, the user can add the Linear device to their Favorites, and then tap
the garage door tile to display and operate the
garage door’s controls.
Figure 1: Linear display
Table 1: Garage door state icons
Icon color
Garage door status
The garage door is closed.
The garage door status is unknown.
The garage door is open.
