Clare Controls GD00Z-5, Integration Release Notes

Page: 1 / 12

Doc ID
– 1042 • Rev 08
1 / 12
Linear Garage Door Opener
Integration Release Notes
For model GD00Z-5
Content
Preface...1
Introduction...1
Installing GD00Z-5 devices...2
Pairing and removing the Linear using ClareHome or FusionPro...2
Installing the GD00Z-5 transceiver and tilt sensor...11
Using the garage door opener in the ClareHome app...11
Incompatible openers...12
Contact information...12
Last modified : 08/17/20
Preface
For information on Z-Wave and ClareHome, see Installing Z-Wave with
ClareHome .
Notes
•
When installing Z-Wave devices, ensure that there is nothing inhibiting their
signal. Z-Wave relies on radio signals. Metal or thick walls may limit their
signal strength.
•
We recommend having 2 or more repeating Z-Wave devices.
Introduction
The Linear GD00Z-5 Garage Door Opener Remote Transceiver provides
position-aware garage door integration to ClareHome via the Z-Wave network. It
is compatible with most automatic garage door openers connected to a sectional
garage door. Installers only need to pair (adding) the unit into the ClareHome
Z-Wave network, mount the unit, and then connect two wires.