Clare Controls CV-B13D20-ODIW, Installation Manual, Page: 34 / 40

28
Configuring for wireless use
To connect your mini dome camera for wireless use:
1. Connect the camera to your network with either a
powered Ethernet cable, or connect it with an unpowered
Ethernet cable and the AC power supply (included).
2. Change the IP settings of your computer to interact with
the camera. Be sure to note what was originally in place
before making any changes.
a.
Go to Start Menu > Control Panel > Network and
Internet > Network Sharing Center.
b. Click
Local Area Connection
(or Wireless Network
Connection).
c. In the Local Area Connection Status dialog, click
Properties
.
d. Highlight
Internet Protocol Version 4 (TCP/IPv4)
,
and then click
Properties
. Enter the following
information:
IPv4 Address:
192.168.1.245
Subnet Mask:
255.255.255.0
IPv4 Gateway:
192.168.1.1
3. In your web browser’s address bar, enter
192.168.1.250
.
4. Log in with the User Name:
clareadmin
and the
Password:
secure7
.
5. Click the
Configuration
tab (along the top of the window),
the
Network
Tab (on the left side of the window), and
then the
Wi-Fi
tab (below the Configuration tab).
6. From the Wireless list, select your home wireless network.