Clare Controls CV-B13D20-ODIW, Installation Manual, Page: 12 / 40

6
 The link indicator blinks if the wireless connection is
successful.
Installation
To ensure the camera operates properly, install the camera
according to the instructions below.
Before you start
 Make sure the device in the package is in good condition
and all the assembly parts are included.
 Make sure all the related equipment is power-off during the
installation.
 Check the specification of the products for the installation
environment.
 Make sure the power supply matches the required voltage to
avoid damage.
 If the product does not function properly, contact your dealer
or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
 Make sure that the wall is strong enough to withstand three
times the weight of the camera.
 For the camera that supports IR, you are required to pay
attention to the following precautions to prevent IR reflection:
 Dust or grease on the dome cover will cause IR reflection.
Do not remove the dome cover film until the installation is
finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
 Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back
into the lens causing reflection.