2
ClareVision Network Video Recorder Installation Guide
Hard disk installation (optional)
Additional SATA hard disks can be installed in the NVR. Disconnect the power
from the NVR before installing a hard disk drive (HDD). A factory recommended
HDD should be used for this installation.
Up to 8 SATA hard disks can be installed on the NVR.
Tools required: screwdriver.
To install the hard disk drive into the NVR:
1.
Remove the cover from the NVR by unfastening the screws on the rear and
side panels.
2. Connect one end of the data cable to the motherboard of the NVR and the
other end to the HDD.
