Clam Corp Fish Trap Guide 8063, Owner'S Manual

Page: 11 / 12

11
- S t e p T e n -
Angle the Seat Assembly slightly while placing the bottom lip of the Front Seat Bracket under the
outside edge of the Base lip.
Tilt the complete assembly downward so that the Rear Seat Bracket lands upon the Support Tube.
Reach under the Rear Seat Bracket and slide the Latch Clip outwards and then up against the underside
of the Support Tube. Squeeze the Latch Clip into the horizontal slot of the Rear Seat Bracket.
Secure the position of the Latch Clip by pushing it into the two holes located above the horizontal slot
of the Rear Seat Bracket.
To finish, place the Center Console on the front Base ledge and Support Tube and your assembly
process is complete.
WARNING:
ALWAYS KEEP THE LATCH CLIP IN THE SECURED POSITON DURING USE. FAILURE TO DO
SO COULD RESULT IN INJURY FROM THE SEAT COMING OFF OF ITS MOUNTING
SYSTEM.