Installation
32
• press the outer part of the quick connector "G" and extract the pipe "1";
• insert the pipe "1" into the quick connector at the inlet of the internal tank "H"
and connect the fitting "I" with the pipe 2.
7.2.4.
Step 4: fill the reserve tank with demineralized water
• unscrew the cap of the tank previously removed;
• clean the tank by pouring in demineralized water, shaking it and emptying it, re-
peat the process at least 2 times;
• fill the tank with demineralized water of the quality required in
par. 4. Demine-
ralized water
;
• if necessary, use a flask to fill the tank following the instructions given below:
1.
always use the same flask exclusively for this operation;
2.
wash the flask thoroughly with demineralized water, fill it partially, shake it and
empty it, do this at least 2 times;
1
G
1
I
H
2
