12
Instruc
tions f
or user - 9120-34315 - DSX - 801049 - No
v
ember 2012 v1.00
8. Operation
Lock level
To enter “Lock level” mode, you will need to access the Setup
menu.
Press the setup key
and the info key
simultaneously for
at least 3 seconds to call up the setup menu, the display con-
firms by “setup”.
Using the arrow keys
and
to select the available modes.
To enter each mode, press the setup key
and the display
will flash.
New settings can be selected using the arrow keys
and
.
The new settings are stored when the setup key
is pressed
again.
Press the info key
to return to the standard display.
Setting options:
“0“
no restriction (factory setting)
“1“
factory reset via key (countdown) not possible, param-
eters can be seen but not be modified in setup menu
“2“
same as “1”, additionally the setup menu cannot be
opened
“3“
same as “2”, additionally nominal value memory (hand-
wash, shower, bathtub, kitchen) not changeable
“4“
same as “3”, additionally nominal value not changeable
Flow limit
Setting of flow rate limitation.
Setting options:
“--“
no flow rate limitation
“At“
automatic adjustment, i.e. flow rate is limited in
a way so that the selected outlet temperature is
reached
“Eco“
flow rate limitation to max. 8.0 l/min
e.g. “9.0“ limitation to the selected value
Note:
“Eco” is displayed when operating mode “Eco” is selected
and the set temperature is below 43 °C.
Setup menu
2
8
4
7
5
3
6
9
+
1
Display flashes
Press
≥ 3 secs
Menu item order of “Setup menu“:
L A N G UA G E
T O N E
B A C K G R O U N D L I G H T
A U X D I S P L AY
C LO C K
LO C K L E V E L
F LO W L I M I T
