background image

Symbol

Warning

Risk

Ref.

Use manual tools and equipment suitable for
the intended use (in particular, make sure that
the tool is not worn and that the handle is intact
and fully fastened to the rest of the tool); use
them correctly and make sure they don’t fall from
a height. Put them safely back in place after use.

Personal injury from the falling splinters or
fragments, inhalation of dust, shocks, cuts, pricks
and abrasions.
Damage to the appliance or surrounding objects
from falling splinters, knocks and incisions.

Use electrical equipment suitable for the intended
use (in particular, make sure that the power supply
cable and plug are intact and that the parts featuring
rotary or reciprocating motion are fastened
correctly); use this equipment correctly; do not
obstruct passageways with the power supply cable,
make sure no equipment could fall from a height.
Disconnect it and put it safely back in place after
use.

Personal injury from electrocution, falling splinters
or fragments, inhalation of dust, shocks, cuts,
pricks, abrasions, noise and vibration.

Damage to the appliance or surrounding
objects from falling splinters, knocks and
incisions.

Make sure any portable ladders are positioned
securely, and that they are suitably resistant and
that the steps are intact and not slippery and
do not slide around when someone climbs them
and ensure someone supervises at all times.

Personal injury from falling from a height or
from cuts (stepladders shutting accidentally).

Make sure any rolling ladders are positioned
securely, that they are suitably resistant, that
the steps are intact and not slippery, that they
are fitted with handrails on either side of the
ladder and parapets on the landing.

Personal injury from falling from a height.

During all work carried out at a certain height
(generally with a difference in height of more
than two metres), make sure that parapets are
used to surround the works area or individual
harnesses designed to prevent falls, and that
the space covered during any accidental fall is
free from dangerous obstacles, and that any
impact upon falling is cushioned by semi-rigid
or deformable surfaces.

Personal injury from falling from a height.

Make sure the place of work has suitable hygiene
and sanitary conditions in terms of lighting,
ventilation, the solidity of the structures and
emergency exits.

Personal injury due to knocks, stumbling
and injuries.

During all work, wear individual protective
clothing and equipment.

All operations on the inside of the appliance
must be performed with the necessary caution
in order to avoid abrupt contact with the sharp
parts.

Personal injury from cuts, pricks and abrasions.

Do not use any insecticides, solvents or
aggressive detergents to clean the appliance.

Damage to the plastic and painted parts.

Do not use the appliance for any use other than
normal domestic use.

Damage to the appliance due to operation
overload.
Damage to objects treated inappropriately.

Do not allow children or inexperienced people
to use the appliance.

Damage to the appliance due to improper
use.

Personal injury from electrocution, falling splinters
or fragments, inhalation of dust, shocks, cuts,
pricks, abrasions, noise and vibration.

16

!

!

!

!

!

!

13

14

15

16

17

18

!

19

!

20

21

22

23

GB

Summary of Contents for SX 100 120 Series











































Reviews: