clage E-comfort DEX12 Operating Instructions For The User Download Page 6

DEX ELECTRONIC MPS®

6

3. How to use

•  Plastic surfaces and fittings should only be wiped with a damp cloth. Do not use 

abrasive or chlorine-based cleaning agents or solvents.

•  For a good water supply, the outlet fittings (special tap aerators and shower heads) 

should be unscrewed and cleaned at regular intervals. Every three years, the electri-
cal and plumbing components should be inspected by an authorised professional in 
order to ensure proper functioning and operational safety at all times.

Cleaning and maintenance

Repairs must only be carried out by 
authorised professionals.
If a fault in your appliance cannot be 
rectified with the aid of this table, 
please contact the service organisa-
tion of your importer or the Central 
Customer Service Department. Please 
have the details of the typeplate at 
hand.

Problem

Cause

Solution

Water stays cold, digital 
display does not light up

Master fuse tripped Renew or activate fuse
Safety pressure cut-
out tripped 

Contact customer service

Water stays cold, digital 
display does light up

Safety thermal cut-
out tripped 

Contact customer service

Display flashes error 
message “

Er

“ 

Control system has 
switched off

Switch fuse off and on. If “Er“ 
still flashes contact customer 
service

Flow rate of hot water too 
weak

Outlet fitting dirty 
or calcified

Clean shower head, jet 
regulator or sieves

Fine filter dirty or 
calcified

Let clean fine filter by customer 
service

Selected temperature is 
not reached , decimal point 
lights up

Water flow rate too 
high

Reduce water flow rate at the 
tap

Selected temp. is not 
reached , decimal point does 
not light

Cold water has been 
added via the tap

Tap hot water only; set 
temperature for use

Decimal point flashes

Inlet temperature 
exceeding nominal 
temperature 

Reduce inlet temperature

No response upon keypress

Hood is not fitted 
properly

Let refit the hood properly by 
customer service

4. Trouble-shooting and service

CLAGE GmbH

After-Sales Service
Pirolweg 1 – 5 
21337 Lüneburg 
Germany
Phone:  +49 4131 8901-40 
Fax: 

+49 4131 8901-41 

Email: [email protected]

This instantaneous water heater was manufactured conscientiously and checked sever-
al times before delivery. Should malfunctions nevertheless occur, it is usually only due 
to a bagatelle. First attempt to switch the house fuses off and on again in order to reset 
the electronics. Next, try to remedy the problem with reference to the following table. 
In doing so, you will avoid unnecessary expense of customer service assistance.

EHAB CENTER FOR  
IMPORT AND EXPORT

162 Omar Lotfy st 
Sporting 
21648 Alexandria 
Arab republic of Egypt.
Call us:  01277779272 
 15421

Al-Zamil Co. for Industry,  
Trade and Transport

2973 Imam Abdullah Bin Saud Bin Abdul 
Aziz Road Unit No.6  
Riyadh 13217 
P.O.BOX: 41397  
Kingdom of Saudi Arabia 
Phone:  +966 11 4620146 
Fax:   +966 11 456 9089 
Email: [email protected] 
www.zamilco.com

Nebraska Trading

Mr. Jalal Jaffer 
Block 704 Building 
2333 Road 439 
Salmabad, Block No. 704 
Manama – Bahrain
Phone:  +973 36347413 
Email: [email protected]

Summary of Contents for E-comfort DEX12













Reviews: