Claas AXION 810 CMATIC, Operator'S Manual

Page: 3 / 41

ABOUT THIS OPERATOR'S MANUAL
6543
This is the original operator's manual. It will simply be referred to as the "operator's manual" throughout this
document
This operator's manual complies with the regulations currently in force in the first country the tractor has been
delivered to.
This operator's manual contains the instructions for using, adjusting, servicing, cleaning and transporting the
tractor. It is essential to be familiar with all of these instructions in order to:
-
Improve the performance of the tractor
-
Increase the tractor's availability
-
Extend the service life of the tractor
-
Ensure the correct working conditions in terms of both safety and comfort
If any maintenance operations are missed or if the tractor is used incorrectly, the following is possible:
-
An increased safety risk
-
Premature wear of the tractor
-
A reduction in tractor performance
-
Loss of output and time
Have the tractor serviced regularly by an approved CLAAS distributor.
This operator's manual can be considered contractual. CLAAS has a policy of continuous technical improvement to
all its products, and therefore reserves the right to change without notice and at any time the details contained in
this operator's manual.
The description of the models contained in this operator's manual was established from technical specifications
known at the time this operator's manual was written. The operator's manual contains all of the equipment
(standard or optional) that exists for these models. The presence of this equipment in the tractor depends on the
tractor version and options chosen by the purchaser and the country of sale for this tractor.
Servicing operations during the warranty period are mandatory; failure to carry them out will nullify the contractual
warranty.
Failure to observe the instructions for use and maintenance of the tractor as described in this operator's manual
definitively excludes any possibility of recourse to the CLAAS warranty system.
The instruction and warning plates affixed to the tractor give important information about possible risks of use.
Following these instructions will guarantee your safety!
Front/rear tools have a separate operator's manual.
The CLAAS distribution network is available to respond to any questions that you may have relating to the content
of this operator's manual.
Important information concerning this operator's manual
Important information concerning this operator's manual appears at the end of the manual:
AXION 840-810 CMATIC - 02/2012 - en 3
Find manuals at http://best-manuals.com/search?&s=CLA-11210575