Window comparator mode
● In this mode, the ON or OFF state of the comparative output is controlled with a
pressure in the set range.
0
Pressure
Comparative
output
H (Hysteresis)
H (Hysteresis)
Hi
Lo
ON
OFF
Notes: 1)
Refer to
in “
9
PRO MODE
” for setting.
2) “
” or “
” is displayed for comparative output 1 and “
” or “
” for comparative output 2 on the
sub-display.
3)
7
RUN MODE
Setting the threshold value
● Refer to
<Comparative output 1 / 2 output mode setting>, <Analogue voltage
/ current output / external input selection>
in “
8
MENU SETTING MODE
” for
setting conditions.
● The Sub display conducts the threshold value. Main display does not changed.
Comparative output 1
Comparative output 2
Comparative output 1
Comparative output 2
Comparative output 1
Comparative output 2
EASY mode
(Comparative output 2 is OFF)
EASY mode
Hysteresis mode / Window
comparator mode · Lo side
Hysteresis mode / Window
comparator mode · Hi side
(Note 3)
Press: Increase threshold value to high pressure side.
Press: Decrease threshold value to low pressure side.
Automatic
Display is changed by pressing down.
(Note 2)
Blinks alternately
Notes: 1) If the set pressure range is exceeded, “
” (exceeds the upper limit) or “
” (exceeds the lower limit) will
appear on the sub display. “
” will also appear if the Hi side threshold value exceeds the Lo side threshold
value when setting the “hysteresis mode / window comparator mode” threshold value.
2) Auto-reference value and remote zero-adjustment value are displayed.
For details, refer to “
11
AUTO-REFERENCE FUNCTION
” and “
12
REMOTE ZERO-ADJUSTMENT FUNCTION
.”
3) In the dash line box is not displayed when not setting “
” or “
” in external input switch. For the setting
method, refer to
<Analogue voltage / current output / external input selection>
in “
8
MENU SETTING
MODE
.”
Zero-adjustment function
● The zero-adjustment function forcibly sets the pressure value to “zero” when the
pressure port is opened.
Automatic
Hold down
Key lock function
● The key lock function prevents key operations so that the conditions set in each set-
ting mode are not inadvertently changed.
<Key lock set>
Automatic
Hold down
<Key lock released>
Automatic
Hold down
Peak / bottom hold function
● The peak / bottom hold functions display the peak value and bottom value of the
● The peak value is displayed on the main display and the bottom value is displayed
on the sub-display.
● The higher vacuum side indicates the peak value, while the lower vacuum side indi-
cates the bottom value.
<Peak / bottom hold set>
Hold down
Blinks alternately
<Peak / bottom hold released>
Hold down
8
MENU SETTING MODE
● The mode will change to RUN mode when the mode selection key is held down
during this setting process. In doing so, changed items before holding down the
mode selection key have been set.
RUN mode
<Comparative output 1 output mode setting>
EASY mode
Hysteresis
mode
Press for 2 sec.
Window
comparator
mode
●
Standard type
<Comparative output 2 output mode setting> (Note 1)
EASY mode
Hysteresis
mode
Window
comparator
mode
OFF mode
●
High-function type
<N.O. / N.C. selection>
N.C.
N.O.
●
Standard type
<N.O. / N.C. selection> (Note 1)
Output 1: N.O.
Output 2: N.O.
Output 1: N.C.
Output 2: N.C.
Output 1: N.O.
Output 2: N.C.
Output 1: N.C.
Output 2: N.O.
<Response time setting>
5ms
2.5ms
5,000ms
<Display color of the main display selection>
Red when ON
Green when OFF
Green when ON
Red when OFF
Always red
Always green
<Unit selection> (Note 2)
kPa
MPa
bar
inchHg (Note 3)
kgf/cm
2
psi
mmHg (Note 3)
RUN mode
●
High-function type
<Analogue voltage / current output / external input selection>
Auto-refer-
ence input
Remote
zero-adjust-
ment input
Analogue
voltage output
Analogue
current output
Notes: 1) If the comparative output 2 output mode setting is set to “
”, the display of N.O. / N.C. selection is the same
as the high-function type.
2) In case Japanese, only “MPa” or “kPa” can be set. In the case of a low pressure type, the unit switch setting
item is not displayed.
3) This is not displayed on the high pressure type.
Setting item
Factory setting
Description
Comparative output 1
output mode setting
Sets the output operation of comparative output 1.
Comparative output 2
output mode setting
(Standard type only)
Sets the output operation of comparative output 2.
Analogue voltage /
current output / ex-
ternal input selection
(High-function type only)
Selects analogue voltage / current output, auto-reference input, or remote
zero-adjustment input.
N.O. / N.C. selection
Low pressure type
High pressure type
Normal open (N.O.) or normal close (N.C.) can be selected.
Response time setting
Sets the response time.
The response time can be selected from 2.5ms, 5ms, 10ms, 25ms, 50ms,
100ms, 250ms, 500ms, 1,000ms or 5,000ms.
Displayed color of the
main display selection
Displayed color of the main indicator can be changed.
Unit selection
Low pressure type
High pressure type
Pressure unit can be changed.