4
CK Worldwide, Inc.
•
Observe the safety guidelines in this manual! Do not drill
through the safety cover of the machine, as it will then no
longer be insulated.
•
Remove the plug from the electrical socket before doing any
work on the machine.
•
Insert the plug into an electrical socket only if the machine is
turned off.
•
Keep the cord away from the area where you are working. Run
the cord away from the back of the machine.
•
Check the equipment, cord, extension lead and electrical plug
for damage and signs of wear before each use. Damaged parts
should be replaced by an expert.
•
Follow the accident-prevention regulations of your professional
association.
•
Do not reach into the danger zone of machinery that is turned
on.
•
Always wear safety goggles.
•
Only use tools with an rpm at least as high as the highest idle
rpm of the machine.
•
Inspect the grinding wheel before use. The wheel must be per-
fectly mounted in order to turn freely. Test the wheel for at least
30 seconds before use. Do not use wheels that are damaged,
asymmetrical, or that vibrate.
•
Tighten the wheel retaining nut before each use of the machine.
•
Noise level values: Typically around GS 400=79db (A). Noise
levels can be higher than 85 dB (A) when in use. Wear
hearing protection.
•
Vibration values: the effective speed is typically around GS 400
= 9m/s
2
WARRANTY
In addition to the dealer’s sales contract warranty, the customer will receive a warranty
according to the following conditions:
1. The warranty covers 24 months, dating form delivery of the product. Delivery
must be substantiated by an invoice or other documentation.
2. CK Worldwide, Inc. warrants the TURBO-SHARP
®
X to be free of defects in
materials and workmanship. CK limits this warranty to replacement of the product
or parts thereof, and excludes liability for injury, property damage, or economic
loss attributable to product use or misuse. Warranty claims must be made within
the specified products valid warranty period.
3. In situations covered by the warranty, we ask that the product be returned,
together with the appropriate warranty documentation to the vendor. Please
provide a brief description of the problem.
4. Repairs that are covered by the warranty will not be charged to the customer.
The warranty will not be extended or affected by the repairs. Parts that have
been replaced become the property of CK.
The best results will be obtained by applying light pressure to the
electrode while at the same time rotating it on the disc. Remove
the electrode before turning off the grinder.
Using too much pressure while grinding will damage the grinder
and require more grinding discs; performance will suffer.
Warning :
Always keep the air-intake vents clean.
Accessories :
Only use CK accessories and spare parts.
Spare parts :
Grinding
wheel
TS3-W
Standard
Head
TS3-HB
Optional
Head
TS3-HR
USEFUL TIPS
SAFETY INSTRUCTIONS
