uTouch User Manual
v1.6
14
The next step is to enter name of the user. Name is consisted of last name, middle name, and
first name. Just touch the text box, and the virtual keyboard will open, allowing you to enter desired
text. Please keep the length for each field below 50 characters.
You can also add a photo for each user.
After doing all the previously described steps, you can easily add a photo by touching the
“Open camera”
button. When you are satisfied with the picture, touch the same button, now with
“Get picture”
option. If you are not satisfied with the picture, touch the same button again, since
now it has
“Remove picture”
option. Repeat these steps until you are satisfied with the picture
taken. The picture is stored on the unit, and afterwards on the server in the main database. The
picture is in 240x320 px resolution. This picture will be shown on the display every time the user
checks in on the unit.
Be aware that the picture is saved, and shown afterwards, as a mirror image of the picture
taken. This is because the picture is shown as natural, and the picture shown while taking the picture
is actually shown in mirror.
When done, do not forget to save the data by touching the disk icon in the right upper
corner. If you exit by touching the left arrow icon, the data will not be saved.
IMPORTANT: If user type is "Fingerprint 1:1", "Fingerprint 1:N" or "Pin only", user
can check in also by Card ID if card is assigned to user
