Error Code
Definition
Solution
1
Current error or MOS damaged
Replace controller
2
Throttle Abnormality
Disconnect throttle
wire(located in
controller box, or in
front of handle bar if
the bike has water
proof quick release
connector) to see
whether the ERROR
code disappears. If
disappear, replace
throttle.
3
Motor Abnormality
Re-connect motor
wire(located
underneath chain
stay at right side). If
still doesn’t work,
replace a new motor.
4
Motor Hall Abnormality
Contact with seller,
return full rear
wheel to replace a
motor rotor.
Troubleshooting
If there are errors about the electronic control system, the error code will appear
automatically.