5.2.2
Adding Manual Alarm
The purpose of Manual Alarm is for user to have a trial test for all your settings.
For example, before the CG500MS PIR motion sensors are installed or the dry contact inputs
are connected to sensors, the user can test whether the alarm messages are delivered to the
right person through the right phone number.
STEP 1.
Try to enable the manual alarm by pressing
icon as shown in Figure 2-1. The
following message will appear:
Figure 5-3 Confirmation Alarm
To confirm, press “Yes”. The notification message box will appear as shown in Figure 4-4.
Figure 5-4 Notification to enable Alarm
