10 - ENG
ENGLISH
1.5 Connecting and Installation
1.5.6 Connect STB to a TV set - HDMI
HDMI, or high-definition multimedia interface, is a
next-generation interface that enables the transmission of
digital audio and video signals using a single cable without
compression.
“Multimedia interface” is a more accurate name for it
especially because it allows multiple channels of digital audio
(5.1 channels). When connecting via HDMI, you do not need to
connect Audio Cables. You only need to connect Audio cables
when connecting via HDMI/DVI.
Note
•
Connect the cable with input jack on STB properly shown in
the picture.
• The design of the Rear Panel may be changed without any
notice in advance.
1.5.9 Loop Though
• If you have another analogue or digital STB and you
wish to use the same antenna cable then you can
connect it via the loop through. Connect one end of
the coaxial cable to the Loop Through on the STB and
connect the other end to the ANT IN jack on your
second STB.
1.5.7 Connect the receiver to a Hi-Fi System
• Connect a RCA stereo cable from the AUDIO L/R jacks,
S/PDIF on the receiver to the LINE, AUX, SPARE
or EXTRA input jacks on your Hi-Fi System.
1.5.8 Connect the receiver to a Digital Audio System
• If you have a DAC with S/PDIF coaxial cable input,
you can connect the receiver with it to enjoy higher
quality sound. Connect S/PDIF optical cable to a digital
amplifier.
• TV
• Satellite Receiver
• Satellite Receiver
• Hi-Fi System
• Digital Amp
• Satellite Receiver
• STB
STB_CityCom_Sat_111379_CCR545_Eng.indd 10
2010-08-03 �� 8:26:58
