MENU OPERATION
15
MENU OPERATION
14
1.B. MANUAL CHANNEL SEARCH
When you are in the transponder window (right side of this screen), you can add, delete or edit
transponder information and also scan the selected transponder to find the channels. Select the
transponder using “up/down” keys or “page up/down” keys and press “OK” key to start
search for the selected transponder. You can also
monitor the status of searching process.
When you want the other satellite than current one,
move to the satellite window and change it to new one.
You can move between the satellite window and the
transponder window by pressing “FAV” key“or
“ left / right” keys (
◀∙▶).
If you cannot find the desired transponder from the
transponder list, you can add new one by pressing
“ F1” key and entering appropriate parameters for this
transponder. When you want to modify the parameters
of an existent transponder, select the transponder and
enter into the edit mode by pressing “F2” key. After change all the necessary parameters, press
“Exit” key to escape from the edit mode. You can also delete unwanted transponders by pressing
“F3” key.
Each parameter has following meanings.
2. Edit Channels
You can edit channels, group them into the favorite list and also change the properties of each
channel on various channel lists from this menu.
Select “ Edit Channels ” item in the main menu, and you will be asked to enter your PIN code.
You can find the following “ Edit Channels ” screen
when you enter the correct PIN code.
There are two modes in editing the channels – normal
mode and block mode.
In normal mode, you can edit each channel
separately. You can add to the selected channel into
the favorite list. And you can also delete, lock/unlock or
rename each channel. In block mode, you can edit
multiple channels at a time. You can select multiple
channels and add them to the favorite list.
You can also delete, move or lock/unlock them at a time. To select block, move to a channel and
press “ OK ” key and move to another channel and press “ OK ” key, so on.
When you want to exit block mode, press “Exit” key to return to the normal mode.
You can change the list you want to edit using “
” key and “FAV” key. When you press “
” key,
the current list is changed between TV channel list and Radio channel list. When you press “ FAV ”
key, the current list is changed as follows: All channels -> FTA channels -> Scrambled channels ->
Favorite 1~8 channels.
2.A. Add to favorite list – F1 key
Select channel that you want to add to the favorite list using the “up/down” keys and the “ page up /
down ” keys. When you want to add multiple channels into the same favorite list, set those channels
as block by pressing “ OK ” key at each channel. You can also deselect each selected channel by
pressing “ OK ” key again. After select channel or set block, press “F1” key to invoke “Add To
Favorites” window. Select favorite list you want from the window.
Please note that you can not invoke “Add To Favorites” window when the current channel list is the
favorite list.
You can also sort the channel list by pressing “ i ” key.
Freq.
S/R
PoI.
FEC
Input the frequency of the transponder you want to find manually.
Input the symbol rate of the transponder you want to find.
Select the polarization of the transponder you want to find. In the case of
horizontal,
18V and in the case vertical, 13V are output through LNB line.
Select the FEC of the transponder you want to find. You can select the value of
1/2, 2/3, 3/4, 5/6, 7/8 or auto.
If you cannot find the desired satellite from the satellite list, you can add new one by pressing “F1”
key and entering appropriate parameters for this satellite. The default name of the added satellite is
“UserSAT-No.” When you want to change the name of the current satellite, press “F2” key and
enter new name. You can also delete unwanted satellites by pressing “F3” key after select it.
