7
MODULATION_FREQUENCY
MODULATION_FREQUENCY_DESCRIPTION
DMX_START_ADDRESS
SLOT_INFO
SLOT_DESCRIPTION
SENSOR_DEFINITION
SENSOR_VALUE
RECORD_SENSORS
CURVE
CURVE_DESCRIPTION
IDENTIFY_DEVICE
To learn more about RDM, a good place to start is the Wikipedia article on RDM (lighting) at:
http://en.wikipedia.org/wiki/RDM_(lighting)
DMX addressing
Set the starting address for the
QolorFLEX
®
4x10A
Dimmer using the DMX Address rotary
switch. The switches are labeled as 100’s, 10’s, and 1’s. To set the starting address, simply
twist the rotary switches to match the desired starting address
,
and the remaining three slots
are addressed contiguously. The highest starting address that can be set by the rotary switches
is limited to 509 in the
4x10A
Dimmer.
DMX addressing may also be set using RDM. When RDM is used, the individual dimmer
channels may be set independently,
and
to any DMX address.
Whichever method is used, last takes precedence. The unit maintains the last used setting over
power cycles, and checks on power up to see if switches have been changed while the unit was
off.
