10
1.
Connect the +VDC circuit to one of the four + output terminals and connect the -VDC
circuit to the accompanying –
output terminal.
2.
Select the LED Curve for each dimmer channel used.
3.
If you wish to change the PWM frequency, use RDM or the MOD DIP switch to select
the frequency desired.
5750
Output Terminals
Note
The
4x10A
Dimmer is a constant voltage PWM dimmer and so will work with any size LED load
that is within the Dimmer’s 40A current and
12VDC
voltage range. Note that constant voltage
dimmers do not compensate for voltage drop in load wiring so care should be taken to optimize
load wiring designs by minimizing run length, assuring termination quality, and assuring
adequately sized wire is used.
Appendix A: Using
QolorFLEX™
Dimmers with LED Tape
The CTI 5700
QolorFLEX™
Dimmers have been optimized for use with 12V LED tape. The
4x10A
Dimmer can be used with single color, two color (variable white), three color (RGB), or
four color (RGBW, RGBA) tape.
How much Tape can I use with one
QolorFLEX
®
4x10A Dimme
r?
LED tape load current varies by brand and style. Use the manufacturer’s mA/meter
specification figure to determine your load, and distribute your load to assure no more than 10A
per
4x10A
Dimmer. Consult your tape manufacturer for more information.
Connecting Single Color Tape
12
Volt single color tape is provided with a VDC circuit and a –VDC circuit.
