4-10
ErrS
ErrS
-
ERROR MESSAGES
Error Messages will be displayed in the Error Submenu on the LED display if an error occurs. Encoder
messages suggest that the AutoYoke has been knocked. Calibrate errors suggest that an attribute was
unable to Calibrate correctly or that the attribute is not present. Contact City Theatrical, Inc. if you are
unable to recover from an error following a power down and recalibrate.
· 101 Pan Calibrate failure
· 102 Pan encoder failure
· 111 Tilt Calibrate failure
· 112 Tilt encoder failure
· 121 Iris Calibrate failure
· 131 Focus Calibrate Failure
· 202 Bad Serial or DMX
· 203 NVRAM Parameters are set to illegal values
· 401 Stack Overflow - Unit needs to be reset
· 501 NVRAM Failure
· 900 Unknown Interrupt
To view Error Messages (Error Messages will appear in numerical order, not in chronological order):
1.
Press
Menu
:
Addr
Addr
(Address)
Addr
Addr
will appear on the display.
2.
Press
st
:
ErrS
ErrS
(Errors)
Advance to
ErrS
ErrS
.
3.
Press
Enter
:
Error number will appear on the
display.
4.
Press
Enter
:
Number of times error has
occurred will appear on display.
5.
Press
Enter
:
CLr
CLr
(Clear?)
CLr
CLr
will appear on display.
6.
Press
Enter
:
This will clear Error record. To
maintain the Error record, press
Menu
as in the next step instead.
7.
Press
Menu
:
noEr
noEr
(No Error)
Return to the upper level and
menu, or repeat steps #3 - #6
using
st
keys to toggle
between Error Messages. When
all Error Messages have been
cleared,
noEr
noEr
will appear on
the display.
-27-
