CITROËN DS3 ULTRA PRESTIGE, Handbook

Page: 195 / 251

DS3_en_Chap10_info-pratiques_ed01-2014
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a CITRoËN dealer or a qualified
workshop for assistance.
F
Check that the compressor switch is at
the " O
" position).
F
Uncoil fully the electric cable, stowed under
the compressor.
F
Connect compressor's plug to the vehicle's
12 V socket.
F
Switch on the ignition.
F
Start the compressor by placing the switch
at the " I
" position and leave it running until
the tyre pressure reaches 2.0 bar.
The sealant product is injected into the tyre
under pressure; do not disconnect the pipe
from the valve during this operation (risk of
splashing and stains).
Take care, the sealant product
is harmful (e.g. ethylene-glycol,
colophony...) if swallowed and causes
irritation to the eyes.
keep this product out of the reach of
children.
The use-by date is marked on the
cartridge.
after use, do not discard the
cartridge by the roadside, take it to
a CITRoËN dealer or an authorised
waste disposal site.
Don't forget to obtain a new sealant
cartridge, available from a CITROËN
dealer or a qualified workshop.