24
4.5.
IMPORTANT INFORMATION
In order to ensure a proper functioning of the machine and in order to avoid injury, we ask you
to please follow the following points:
1. The fastening screws of the cross holder cannot be loose or missing.
2. Do not place any foreign objects in the machine as this may cause unnecessary damage.
3. Should machine blockage occur, it is important to disconnect the machine from its power supply,
only then is the front cover to be removed in order to remove orange peels.
4. Never try to remove blockages while the machine is operating. This could lead to serious
injury.
5. Due to the fact that the peel removers and the knife are important functional parts of the
machine, ensure that these parts are mounted carefully and correctly.
5. TROUBLSHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine is not working
Check if machine is plugged
into power outlet
Connect to power source
No electricity from power
outlet
Check the power outlet for
electricity
Main switch off
Check if main switch on the
side of machine is switched on.
ON/OFF switch damaged
Contact your customer service
representative.
The press elements are
blocked
Unplug the machine from its
electricity source andd remove
the object which is blocking the
machine in the press
elements.
Safety detectors are
damaged.
Contact your customer service
representative.
Switching circuit is damaged
Contact your customer service
representative.
Display shows “End position“
Magnet switch for the end
position is damaged
Contact your customer service
representative
Display shows “Feeder tube“
Feeder tube/Inlet tunnel
mounted incorrectly
Mount the Feeder tube/Inlet
basket according to the
instruction manual.
Display shows “Cross holder”
Cross holder mounted
incorrectly.
Mount the Cross holder
according to the instruction
manual.
Display shows “Fruit sieve
supporter”
Fruit sieve supporter mounted
incorrectly.
Mount the fruit sieve supporter
according to the instruction
manual.
Display shows “Front cover
right”
Front cover mounted
incorrectly.
Mount the front cover
according to the instruction
manual.
Display shows “Front cover
left”
Front cover mounted
incorrectly.
Mount the front cover
according to the instruction
manual.
Display show a error message,
although all parts are mounted
according to the instruction
manual.
Security-Magnet is loosen or
the magnet switch is
damaged.
Contact your customer service
representative.
The machine has blocked
often during the pressing
Power supply voltage is
insufficient.
Check if the power supply
coincides with that which is
