Citrix NetScaler Quick Start Guide: MPX 25100 40G, MPX 25160 40G Platform
13
set system user nsroot -password
Enter password: *****
Confirm password: *****
save ns config
reboot
Note:
For information about deploying a high availability (HA) pair, see
http://docs.citrix.com/en-us/netscaler/10-1/ns-system-wrapper-10-con/ns-nw-ha-intro-wrppr-
con.html
.
LCD Keypad Setup
To set up the appliance by using the LCD keypad on the front panel of the appliance, press the
"<" key on the keypad, and enter the following initial settings in the order shown:
1.
Subnet mask
2.
NSIP address
3.
Gateway
The subnet mask, NSIP, and gateway values are saved in the configuration file. You can then use
the NSIP to connect to the appliance remotely. For more information, see
http://docs.citrix.com/en-us/netscaler/10-1/ns-gen-hardware-wrapper-10-con.html
.
Note:
For information about deploying a high availability (HA) pair, see
http://docs.citrix.com/en-us/netscaler/10-1/ns-system-wrapper-10-con/ns-nw-ha-intro-wrppr-
con/ns-nw-ha-cnfgrng-ha-con.html
.
Configuring the LOM Port
You can use the Intelligent Platform Management Interface (IPMI), also known as the Lights Out
Management (LOM) port, to remotely monitor and manage the appliance, independently of the
NetScaler software. For initial configuration of the lights-out management (LOM) port, connect
to the port's default IP address and change it to the address that you want to use for remote
monitoring and management. Also specify the administrator credentials and the network
settings.
Note:
The LEDs on the LOM port are unoperational by design on all MPX platforms, except MPX
22040/22060/22080/22100/22120 and MPX 24100/24150.
To configure the NetScaler LOM Port
1.
Connect the LOM port to a management workstation or network.
2.
In a web browser, type:
http://192.168.1.3
.
Note:
The NetScaler LOM port is preconfigured with the IP address 192.168.1.3 and
subnet mask 255.255.255.0.
3.
In the
User Name
box, type
nsroot
.
4.
In the
Password
box, type
nsroot
.
5.
On the
Configuration
tab, click
Network
and type values for the following parameters:
