1
Quick Installation and Configuration
Welcome to the Citrix NetScaler Application Delivery product line. Please take a minute to review the
following instructions before proceeding with the installation of the Citrix NetScaler 9010 appliance. If
you require further explanation of any item covered in this document, please see the
NetScaler
Hard-
ware Installation and Setup Guide
.
Note
NetScaler 9.1 nCore is not supported on this hardware platform.
Before You Begin
Before installing your Citrix NetScaler 9010 appliance, prepare all of the equipment and materials you
will need during the installation process. Completing this preparation up front will ensure a smooth
installation with minimal interruption.
Ensure that the following components and accessories are included:
•
One NetScaler 9010 appliance
•
One accessory kit that contains:
•
One RJ-45 to DB-9 adapter
•
One 6 ft RJ-45/DB-9 cable
•
One 9010 Quick Start Guide
•
One Citrix NetScaler Resource CD
•
Two AC power cables
•
One mounting rail kit
In addition to the items listed above, the following items may also be required:
•
Ethernet cables
•
Ethernet switch ports to connect to the appliance
•
Management workstation (PC or laptop)
•
Ethernet crossover cables
The NetScaler Appliance
Your NetScaler appliance has the following parts. We will be referring to different parts of the NetScaler
during setup and configuration.
Note
On the front of the 9000 series FIPS model, you will notice an additional port on the right side. This port is
used in support of FIPS 142 level 2 compliance. For more information about configuring the FIPS attributes
of the appliance, see the
Citrix NetScaler Traffic Management Guide
.
Figure 1
The Citrix NetScaler 9010, Front Panel
6)3V
&RQVROH3RUW
/&'
