Citizen U70 series, Owner'S Manual

Page: 6 / 32

10 11
English
Correct reference position
Before use
2.
Pull out the crown to
position 1 .
“ 0 ” is displayed and
all hands move to
indicate the current
reference position.
3.
Check the reference position.
• Go to step
3
on page 40 if the
reference position is incorrect.
4.
Push in the crown to position
0 to finish the check.
The current time is indicated on the
analog section.
1
2
3
4
7 Checking the reference position
Check whether the reference position is correct or not.
Check and adjust the reference position
also in the following cases:
• The correct time is not displayed on
the analog section even after the time
setting.
• Each chronograph hand does not point
to
“ 0/.00 ” or “ 60 ” even after resetting
the measurement time.
1.
Press button M to change the
mode to Chronograph. (“ CHR ”)
Crown
Button A
Button B
Button M
“CHR”
Chronograph 1/10 second
and 1/100 second hands
Chronograph
second hand
1 Chronograph second hand points
to “60.”
2 Chronograph 1/10 second and
1/100 second hands point to
“0/.00.”
3 Hour, minute, and second hands
point to 12:00.
4 24-hour hand points to “24.”