Citizen U70 series, Owner'S Manual

Page: 20 / 32

38 38 39
English
• The correct time is not displayed on the
analog section even after the time setting.
• Each chronograph hand does not point
to “0/.00” or “60” even after resetting the
measurement.
1.
Press button M to change the mode
to Chronograph. (“ CHR ”)
2.
Pull out the crown to position 1 .
“ 0 ” is displayed and all hands
move to indicate the current
reference position.
• Go to step
5
on page 41
when the reference position is correct.
(0:00:00/measurement time: 0)
Symptoms Remedies Page
Others
The alarm tone does not sound.
Confirm the alarm setting. 26
Charge the
energy cell
. 9, 30
The movement or indication is
not normal.
Reset the watch.
If the watch still does not work
properly, contact the Citizen
Service Center or the store where
you purchased your watch.
42
The watch does not work properly
even if you have tried the remedies
stated in “Troubleshooting” (pages
36 to 38).
The watch does not move even
if the
energy cell
is fully charged.
( page 32)
Contact the Citizen Service
Center or the store where you
purchased your watch.
–
Adjust the reference position in the following cases:
Continued on the next page
24-hour
hand
Troubleshooting
Adjusting the reference position
Crown
Button A
Button B
Button M
“CHR”
Chronograph 1/10
second and 1/100
second hands
Chronograph
second hand