- Eng 10 -
English
BEFORE REQUESTING REPAIRS OR TESTING
Make sure to check the following before sending your blood
pressure monitor away to be tested or repaired.
Problem
Checks
Response
Display stays
blank when
you press the
“POWER”
switch.
Check whether
the batteries are
dead.
Replace all the batteries
with new ones.
Check whether
the batteries are
installed the right
way round (
and oriented
correctly).
Load the batteries in the
correct direction.
No
measurements
can be taken.
Check whether
the measurement
icon is
displayed.
Attach the cuff properly.
Check whether
the cuff is
attached correctly.
Did you stay
calm during
measurement?
Measure your blood
pressure again, making
sure to remain still.
Note that blood pressure measurement may not
be possible for someone with an extremely weak
pulse or cardiac arrhythmia (irregular pulse).
Your blood pressure readings are
abnormally high or low compared
with those taken in hospital.
See Q & A
Other phenomena
Remove the batteries from
the unit and change them
with new ones.
SPECIFICATIONS
Measurement system:
Oscillometric method
Measurement Localization
Upper Arm
Cuff:
Soft cuff
Arm circumference range:
22.0 to 32.0 cm
Measurement range:
Pressure
0 to 280 mmHg
Pulse
40 to 200 pulse/min
Accuracy:
Pressure
±3 mmHg
Pulse
±5% of reading
LCD displays:
Pressure
3 digits
Pulse
3 digits
Icons
Measuring:
Exhaust:
T
Re-Measure:
S
Battery:
Switch:
POWER switch
In
fl
ation:
Manual ln
fl
ation by Pumping Bulb
De
fl
ation:
Air release system
Rated voltage:
6 V DC
0.1 W (
:
direct current)
Exhaust:
Quick Exhaust Valve
Power supply:
4 “AA” Size Batteries
Battery duration:
Approx. 1000 times Manganese
(160 mmHg, 1 time / day, 22°C)
Automatic Power Off function:
Approx. 3 min. (after activated)
Dimensions:
123 (W) x 95 (D) x 44 (H) mm
Weight: (Apparatus and batteries)
Approx. 410 g
Operating conditions:
Temperature 10°C to 40°C
Humidity
30% to 85% RH
Storage conditions:
Temperature -20°C to 60°C
Humidity
10% to 95% RH
Electric shock protection:
Internal power unit
Degree of Protection
Type BF applied part
Mode of operation:
Continuous operation
Service Life:
5 years
Cuff’s Life:
Approx. 2000 times
Accessories
:
Set includes a cuff, Pump, 4 AA batteries (R6P) for the
monitor, Instruction Manual.
* Applied part for this device is Cuff.
* A range in barometoric pressure 105 kPa to 70 kPa
• Overall system accuracy of this device is met with the requirement of
item 7.9 of EN1060-3.
EN1060-3 : Non-invasive sphygmomanometers Part 3 (European
Standard)
