- Eng 4 -
English
- Eng 5 -
English
Maintenance Precautions
1. DO NOT store the blood pressure monitor in locations
exposed to direct sunlight, high temperatures (over 60°C),
low temperatures (below -20°C), high relative humidity
(over 95%) or excessive amounts of dust.
Make sure to store the blood pressure monitor, where
children, pets and or pests are not there.
2. DO NOT drop the blood pressure monitor or subject it to
other shocks or vibration.
3. Remove the batteries if the monitor will be left unused for a
long period.
4. DO NOT attempt to disassemble the monitor.
5. DO NOT bend the cuff or the air hose excessively.
6. If the monitor is very dirty, wipe it clean with a cloth moistened
with sterilizing alcohol or a neutral detergent. Then wipe it
with a dry cloth.
7. NEVER clean the blood pressure monitor with thinners or
benzene, as this could damage the monitor.
8. To clean the cuff, wipe it with a moist cloth. Avoid hard
rubbing, as this will cause air leakages. Take care also not to
get water into the air hose.
Warning
No modi
fi
cation of this device is
allowed.
Symbols Explanation
:
The CE marking is meant to provide information to
market inspectors in the EU member countries.
: Type BF applied part
: Keep dry
:
Warning
: Refer to instruction manual before use
: Appliance compliance WEEE directive
Pb
: Accumulators and battery packs for separate
collection
:
Manufacturer
Warning
The device has been tested and
homologated in accordance with
EN60601-1-2 for EMC. This does
not guarantee in any way that
the device will not be affected
by electromagnetic interference.
Avoid using the device in high
electromagnetic environment.
Nature and frequency of maintenance:
This product is designed for use over an extended period of time;
however, it is generally recommended that it be inspected every two
years to ensure proper function and performance.
Protect the nature environment:
Please help to protect natural environment by respecting national and/or local
recycling regulations when disposing of the battery and the product at the
end of their useful live.
WEEE MARK
If you want to dispose this product, do not mix with general
household waste. There is a separate collection systems for used
electronics products in accordance with legislation under the WEEE
Directive (Directive 2002/96/EC) and is effective only within European
Union.
Information for Users on Collection and Disposal
of used Batteries.
The symbol in this information sheet means that used batteries
should not be mixed with general household waste.
For proper treatment, recovery and recycling of used batteries,
please take them to applicable collection points.
For more information about collection and recycling of batteries,
please contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
Information on Disposal in other Countries outside the
European Union.
This symbol is only valid in the European Union.
If you wish to discard used batteries, please contact your local authorities or
dealer and ask for the correct method of disposal.
Note for the battery symbol.
The symbol might be used in combination with a chemical symbol. In this
case it complies with the requirement set by the Directive for the chemical
involved.
Pb
Reference European standard:
The blood pressure measuring device corresponds to regulation EN60601-1,
EN1060-1, EN1060-3, EN1060-4.
Calibration:
The blood pressure measuring device is generally recommended to have
the monitor inspected every two years to ensure correct functioning and
accuracy. Please contact a distributor.
Name:
CITIZEN SYSTEMS (H.K.) LIMITED
Address: 62 Hung To Road, Kwun Tong, Kowloon, Hong Kong
European Representative:
Name :
WvW elektronische Geräte Vertrieb GmbH
Address :
Fintelmannstraße 20/Eingang, Martin-Heydert-Straße,
D-14109 Berlin, Germany
• For technical data, please contact our European
Representative
(Batteries supplied with the unit should be loaded in compartment
before you use the blood pressure monitor.)
1
Open the cover of battery compartment.
Pressing the hook down, pull the cover toward you to open.
Lug (projecting section)
* If the Blood pressure monitor
is left unused for an extended
period of time, the batteries
should be removed from the
compartment.
Battery
cover
Battery
compartment
4 “AA” batteries
Hook
2
Place batteries in the compartment.
Put the batteries paying attention to the positive and negative
terminal symbols
and
.
LOADING THE BATTERIES
