- 32 -
GS B n
[Function]
Specifying/canceling the black/white inverted printing
[Code]
<
1D
>
H
<
42
>
H
<
n
>
[Range]
0
≦ｎ≦
255
[Outline]
This command specifies or cancels the black/white inverted printing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0 Function
0
The black/white inverted printing is canceled.
1
The black/white inverted printing is specified.
[Caution]
• The black/white inversion works on internal and downloaded characters.
• The black/white inversion works also on the right spacing of characters defined by ESC
SP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI
characters, or the skip area specified by HT, ESC $, or ESC
＼
.
• This command does not affect the space between lines.
• Black/white inversion specification takes precedence over underline specification.
Underline printing specified is, therefore, nullified if black/white inversion is specified;
the underline setting, however, remains unchanged.
[Default]
ｎ＝
0
